User manual

ePure TAM 2nd generation 19
ePure TAM 2nd generation
Activate/deactivate the answer machine (from the
handset)
● Press , select Answ Machine and press OK.
● Select Answ On/Off and press OK.
● Select On or Off using the navigation keys +/- and press
OK. is displayed when the answer machine is switched
on.
● You must now select the desired operating mode and
record a personal outgoing message:
Record a personal outgoing message
● Press , select Answ Machine and press OK.
● Select Answer Mode and press OK.
● Select Record also (the caller can leave a message) or
Answer only (the caller cannot leave a message) and press
OK.
● Select Personalized and press OK.
● Select Record and press OK.
● Speak your outgoing message into the handset
microphone. Your personal outgoing messages can be up
to 1 minute long (max.).
● Press OK to end recording. The recorded personal
outgoing message is played back.
- To restore the standard outgoing message, select
Record also or Answer only followed by Predefined
and press OK.
- To listen to an outgoing message, select Answer &
Rec or Answer only followed by Play and press OK.
The outgoing message is played back.
- To delete a personal outgoing message, select
Record also or Answer only followed by Delete and
press OK.
Operating the answer machine (from the handset)
If you have new messages on your answer machine the symbol
flashes on the display of the handset. The messages are
played back beginning with the most recent and over the handset
loudspeaker (the handset loudspeaker activates automatically).