User manual

ePure TAM 2nd generation 21
ePure TAM 2nd generation
Answer machine settings
● Press , select Answ Machine and press OK.
● Select Answ Setting and press OK.
● Select the desired function by pressing the navigation key
+/- and press OK.
- Ring Delay – Select the desired delay or Toll Saver. If
you set the delay to Toll Saver, your answer machine will
answer after 2 rings if you have new messages. If you
do not have new messages it will not answer until 6
rings. This enables you to save costs by hanging up
before you are connected.
- Remote Acc. – Switch remote access on or off
- HS Screening – When the answer machine is on and the
function activated, you can listen to the messages being
recorded over the handset loudspeaker
- TAM Language – Select the default outgoing message
language.
Memory full
The recording capacity of your answer machine is 30 minutes
(including outgoing messages).
If the memory is full, Memory full appears on the handset display.
No more messages can be recorded. The answer machine
switches to Answer only mode automatically.
You must delete old messages.
Remote access
You can remote access your answer machine from any external
telephone with DTMF or multifrequency dialling function. Dial
your number press # and enter your PIN code (0000 on delivery).
The remote access PIN code is identical with the PIN code of
your telephone.
Activating/deactivating remote access
To be able to remote access your answer machine you must first
activate the function.
● Press , select Answ Machine/Answ Setting/Remote Acc.
and press OK.
● Select Activate or Deactivate and press OK.