User manual

ePure TAM 2nd generation 7
ePure TAM 2nd generation
Inserting the battery
Step 1: To open the battery door, use a
small tool like a door key, plug the tip
into the recess at the end of handset.
Then, the door can be opened freely
(in the direction of the arrow).
Step 2: The battery compartment is
situated in the handset. Insert the
battery in the battery compartment.
Step 3: Replace the handset cover.
Make sure you install the battery pack and fit the cover the
right way round:
- position the 3 metal contacts of the battery pack against
the 3 blade contacts;
- align the green dot on the handset with the one on the cover.
- align the cover top against the handset top, then clicks it
until middle and bottom sides click into place.
Connecting the phone
● Before you can start using your telephone you must plug in
the telephone connector cable and the power adapter.
● When the phone is delivered, the battery is not yet
charged.
● To charge the battery, insert the handset on the base
station. The battery will take around 6 hours to fully charge
(initial charge).
Telephone line socket
Main power socket
Green dots