User manual

ePure TAM 2nd generation 9
ePure TAM 2nd generation
Handsfree operation
You can use the handsfree function to conduct calls without
holding the handset in your hand and allow others present
in the room to take part in the call.
Activating handsfree before a call:
1. Press . The display shows . Press again . You
can hear the ringing signal through the handset
loudspeaker.
2. Press to deactivate handsfree speaking.
Activating handsfree during a call:
Press . To deactivate handsfree speaking, again press .
Switch ringer off
When a call is coming in, press and hold the key for approx.
3 seconds. The ringer is switched off for this call .
Set speaker/loudspeaker volume
You can adjust the speaker/loudspeaker volume during a
conversation.
Set the desired volume using the navigation key +/-.
Switch handset off
● Press and hold the End call key (approx. 5 sec).
● Press and hold again the End call key to reactivate the
handset.
Set alarm
● Press , select Clock/Alarm using the navigation key
+/- and press OK.
● Select Set Alarm using the navigation key +/- and press
OK.
● Select the desired alarm function (e.g. On once), enter the
alarm time and press OK.