User manual

17
3. Enter a name and press
OK
, enter a number and press
Save
.
4. Scroll
or to the melody you want and press
Select
. The entry is stored.
NOTES
-
When the Contact list is empty, you cannot enter the first entry using the softkey
Names,
you must enter it over the menu:
Press
Menu
, scroll
to
Contact
then to
Add entry
.
-
If the L7 is connected to a switchboard, you may need to enter a pause in a
number. A pause is normally stored after the switchboard access code (e.g. 9).
Press and hold
to insert a pause, the display shows P.
WRITING TIPS
To enter a space, press
.
Press
or to move between characters/digits.
Press
Clear
to delete a character, or press and hold
Clear
to delete all characters.
5.2 Edit the Contact list using the softkey Names
1. In standby, press softkey
Names
.
2. Scroll
or to the entry you want or search alphabetically entering the
first letter of the name.
3. Press the Talk key
to dial the displayed entry.
Or
4. Press
Options
and select a function from the following list:
-
Search –
Enter the first letter of a name to search alphabetically (e.g. if the
name begins with N, press
twice).
-
Add entry –
Add a new entry in the Contact list.
-
Copy Phonebook –
Copy the entire Contact list to another handset. If an entry
with the same number is already stored in the receiving handset, it will not
be copied.
-
Memory Status –
Display the used and free Contact list memory.
-
Delete Phonebook –
Delete all entries in the Contact list.
5.3 Edit the Contact list using the menu Contact
1. Press softkey
Menu
, select
Contact.
2. Select
Search
then scroll
or to the exact entry.
3. Press
Options
and select a function from the following list:
-
Show Details –
Show name, number and melody of the selected entry.
-
Edit Entry –
Edit name, number and melody of the selected entry.
-
Copy Entry –
Copy the selected entry to another handset.
-
Ringtone –
Assign the desired ringtone.