User manual

20
-
Screensaver
Activate or deactivate the screensaver.
-
Auto talk
With Auto Talk switched on, you can answer a call just by lifting the handset off the
base or charger. If switched off, you will have to press the Talk key
to answer a
call.
-
Key beep
When the key beep function is turned to on, you hear a beep with each key press.
-
PBX access Code
If the L7 is connected to a switchboard, you may need to enter an access code in
the dialling sequence to be able to connect to the outside line.
The access code is displayed at the beginning of a number. The code can be up to
4 digits long.
The access code will not be used when you dial the number manually (such as
when you are not dialling from the phonebook). This allows you to make calls to
other switchboard extensions.
7.3 Base settings
The system PIN on delivery is 0000.
1. Press
Menu
, scroll
to
Settings
and press
Select
.
2. Scroll
to
Set Base
and press
Select
.
3. Select a function from the following list:
-
Ringtone
Select from 2 base ringtones.
-
Ringer Volume
The base has 5 ring volume settings plus Off.
-
Dialling Mode
Select Pulse or Tone dialling.
-
Ring Priority
When you have more than one handset registered to your base, you can set one
handset to ring before the other handsets. This allows one handset user to answer
all incoming calls first, for example, the receptionist.
Choose
All Handsets
if you want all handsets to ring at the same time or
Select
Handset
to nominate a handset to ring before the other handsets ring.
-
Recall Mode
Recall is useful to access certain network services and PABX / switchboard
services. The use of the L7 cannot be guaranteed on all PABX.
Ask your network operator for more details.