User manual

21
-
System PIN
The System PIN is required when changing certain settings and for registration /
de-registration. The default setting is 0000. You can change this to your own
preferred number (up to 8 digits).
NOTE -
Note your new PIN code and keep it somewhere safe.
-
Master Reset
You can restore the L7 to its default (original) settings. Resetting the L7 will not
affect the phonebook or Calls list, and all handsets registered to the base will be
retained. Only the handset and base settings are reset.
-
ECO mode
Your L7 offers an ECO mode function which reduces the transmitted power and
energy consumption when switched on. This feature is set to
Off
by default.
NOTE -
When
ECO Mode
is set to
On
, the
is replaced with the and the
handset range will be reduced.
-
Zero Emission
Common cordless phones continue to transmit a radio signal even while the phone
is idle. Swissvoice offers Zero Emission for not adding electro smog when not
needed.
NOTE -
When
Zero Emission
is set to
On
, the
is replaced with the . When
both
ECO Mode
and
Zero Emission
is set to
On,
the icon is replaced with the
.
8. Additional handsets
8.1 Registering an additional handset
You can register up to 8 handsets to your base station.
NOTE -
Additional handsets must be registered to the base before you can use
them. Handset batteries must be fully charged before you start to register. Hold
your handset close to the base during the registration process. Handsets supplied
with your L7 base are already preregistered.
On the base:
Press and hold key on bottom of base until the base emits a double beep. The
base remains in registration mode for 90 seconds.