User manual

26
9.11 Answering machine settings
1. Press
Menu
, the display shows
Answer Machine
, press
Select
.
2. Scroll
to
Answer Settings
and press
Select
.
Select a function from the list:
-
Language -
Select the language for default outgoing messages
-
Answer Mode -
Select
Answer & Record
or
Answer Only.
Then select
Default
OGM
(prerecorded on delivery) or
Personal OGM.
If there is no personal
outgoing message saved, the pre-recorded outgoing message will be
selected automatically.
-
Answer Delay -
Select 2, 4, 6, 8 rings or Time saver mode. If Time Saver is
set, the answering machine answers after 2 rings during remote access if
you have new messages. If you do not have new messages, it answers
after 6 rings. This means you can hang up after 3 rings, saving you time
and the cost of the call.
-
Message Alert -
When you have new messages, with the audible message
alert switched on, you hear an audible alert once at the handset and the
answering machine base beeps every 10 seconds.
-
Remote Access -
Switch remote access on or off / Change the remote
access PIN
9.12 Remote access
Remote access allows you to operate your answering machine and listen to your
messages by calling the L7 from another phone.
Remote operation can only be performed after having switched on the function
(see chapter “Answering machine settings”)
1. Call your L7. When you hear the announcement, press *.
2. Enter your 4 digit remote access PIN (default setting = 0000). You hear a
confirmation beep.
NOTE –
Change the remote access PIN for security reasons (see below).
3. All new messages are played back.
4. Use the following keys to operate your answering machine:
* To enter remote access mode
2 To play all messages
3 To play new messages
4 To skip back during messages
5 To delete during messages
6 To skip forward during messages
9 To switch answer machine off
0 To switch answer machine on