User manual

7
1. Getting started
Location
Place your L7 base within 2 meters of the mains power socket and 1.8 meters from
the telephone wall socket. The socket-outlet shall be installed near the equipment
and shall be easily accessible. Make sure that it is at least 1 meter away from other
electrical appliances to avoid interference. Your L7 works by sending radio signals
between the handset and base. The strength of the signal depends on where you
place the base. Placing it as high as possible ensures the best signal.
HANDSET RANGE
The unit has a range of up to 300 meters outdoors when there is a clear line of
sight between the base and handset. Any obstruction between the base and
handset will reduce the range significantly. With the base indoors and the handset
either indoors or outdoors, the range will normally be up to 50 meters. Thick
concrete and stone walls can severely affect the range.
SIGNAL STRENGTH
The
icon on your handset indicates that you are within range of the base.
When out of range of the base, the
icon flashes. If you are on a call, you will
hear a warning beep. The line will hang up if the handset moves out of range of the
base. Move closer to the base.
Setting up
IMPORTANT
The base station must be plugged into the mains power at all times. Do not
connect the telephone line cord into the wall socket until the handset is fully
charged. Use only the power adaptor and telephone line cord supplied with the
product.
Connecting the base
Connect the base as shown in the figure below. Switch on the mains power.