SWIT Electronics Co., Ltd. M Model： F FLOW10K Tx FLOW W10K Rxx Ver： ：A 10 0000ft/3k km Wireless HD U r Ma User anuaal TThank you for f choosingg SWIT p products. P Please read this user manual m t throughout b before using.
Preface 1. All internal technologies of this product are protected, Including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2. ALL brands and trademarks of SWIT Electronics Co., Ltd. Are protected and other relative trademarks in this user manual are the property of their respective owners. 3.
Safety Precautions Please follow the safety precautions before using . The following conditions are not covered by warranty. 1. Unauthorized repairs or other Unauthorized operations. 2. Inappropriate placement including but not limited to lighting, fire, exposure to rain, water or gas. 3. Using the wrong power supply Warning Do not get any liquid inside the products Do not block the ventilation openings or put substances inside, in order to avoid short circuit, fire or electric shock.
1.
All-Metal Shell Both the transmitter and receiver adopt metal shell which is durable and solid. All hardware design The wireless system is hardware and plug-and-play designed, without installing software, easy to set up. ◆ Multiple battery plates change Transmitter can choose different battery plate according to demand. Remark: 1. The transmission distance may be different, and depend on surroundings, radio wave conditions, buildings, etc.
⑴Anntenna ⑵ Product P lab bel ⑶ Link：Wirel L ndicator ess status in ⑷ Video：Vide V eo signal ind dicator ⑸ Power：Pow P wer status in ndicator ⑹ OLED O displlay screen：0.96 inchess OLED。 ⑺ Joystick：F J Five-directtion adjust button。 (up、down、left、righht、vertical five dire ection for menu adjustingg and confirm.) ⑻ Installation I d. Use the package p sup pplied articulating arm trrestle to insttall the devicce to thread：1//4”-20 thread the camera.
negative.
⑶ Adjustable tighteningg handle i ⑷ Link：Wireless status indicator ⑸ Video：Video signal indicator ower status indicator i ⑹ Power：Po ：0.96 inchees OLED ⑺ OLED display screen： Five-directtion adjustt button。 (up、down、left、righht、verticaal five dire ection for manu ⑻ Joystick：F adjusting and a confirmm.) Frame ⑽ Bottom bracket ⑼ When no signal input，the transmitter t is consisstent with thee receiver dissplay content. See Fig og.
Signal source display No signal input Signal format Frequency channel display Signal strength display Frequency channel Display Signal strength display Fig.1 Fig.2 Initial interface （One-to-multi mode） Initial interface （One-to-multi mode） When the receiver video signal is connected normally, as shown in Fig. 6 When the transmitter has no signal input, see Fig.
Interface changing a ：Changing interface in transmitter via using joystick(left and right),see fig .7、8、9。 b : Changing interface in receiver via using joystick(left and right),see fig .7、9。 One to multi mode High quality mode OFF ON Fig.7 Firmware upgrade Fig.8 Wall through mode Pair Fig.9 Tips: 1. The menu content of transmitter and receiver is different: Quality mode and wall through mode can only be selected in transmitter, see fig.8 2.
6.Connection ⑴ Connecting SDI IN/HDMI IN interface of FLOW6500 transmitter with SDI OUT/HDMI OUT interface of camera or video output device. Connecting SDI loop out interface of FLOW6500 transmitter with SDI IN interface of monitor or switcher. ⑵ Connecting SDI OUT interface of FLOW6500 receiver with SDI IN interface of monitor or switcher.
same scene. ⑸ Wall through mode is recommended for wireless devices under complex operating conditions, such as poor on-site environments, high distance barriers and only 1-2 sets of wireless devices in the same scene. (If more than one set is used in the same scene, it is recommended to use a high quality mode to reduce interaction) Tips：1.When wireless devices under normal operating condition, choose High quality mode can get a better video quality, but transmission distance will be cut. 2.
Fig.
⑵ PPut the recceiver as hhigh as possible to reeduce the disturbance d e.
⑶Avvoid walls, trees andd water to reduce r signnal attenua ation. 9.
10. Specification Model FLOW10K Transmitter FLOW10K Receiver Input SDI×1、HDMI×1 / Output SDI×1 SDI×1 Video format 1080I（60∕59.94∕50）∕1080PsF（24∕23.98）∕720P（60∕59.94∕50)∕1080P （60∕59.94∕50∕30∕29.97∕25∕24∕23.98） Wireless frequency 5180~5220MHz, 5760~5820MHz Modulation mode OFDM Transmission distance 2000m（Line of sight） Power consumption ≤9W operation 0.
