Model: S-1071H(EFP) 7" EFP Field On-camera LCD Monitor User Manual Please read this User Manual throughout before using.
Preface Congratulations on your purchase of this product. Please read this user manual carefully. 1 . All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2 . All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks in this user manual are the property of their respective owners.
Maintenance The Monitor 1. Please keep the signal terminals and the cooling vent away from knife-edge, metal or liquid in order to avoid short-circuit and damage. 2. Please don't try to disassemble any parts of the monitor by yourself, which would probably damage the monitor and do harm to human body, and it will cause the invalidation of product warranty. 3. Please don't touch the screen with your fingers, which would probably deface the screen. 4.
1. Features ◆ High resolution LCD Panel 7-inch, 16:9, 1024×600, 16.77 million colors, 900:1 contrast, and H160°/ V160°viewing angle ◆ 3Gbps SDI support Accept 3G/HD/SD-SDI input ◆ Multi Input/Output Support SDI, HDMI, CVBS input and loop through output ◆ Picture-in-Picture The Picture-in-Picture mode is for cameraman to see the switcher returned CVBS video as an overlay window on the local camera SDI/HDMI monitoring, which is widely used in EFP system.
2. Panel Instruction Front view ⑴ PHONE: Earphone jack, for SDI embedded audio, HDMI embedded audio and analog audio monitoring ⑵ POWER: Power on/off Connect with power cable, press the “POWER” to switch on the monitor. Press again to switch off. Disconnect with power cable if the monitor will not be used for a period of time.
Rear view ⑴ DC 12V IN: Connect with the package supplied DC12V 4-pin XLR power adapter. ⑵ ⑶ ⑷ ⑸ ⑹ ⑺ ⑻ ⑼ ⑽ ⑾ For 3-party power adapter, please ensure the voltage is 6.5-17V, and Pin 1: Negative, Pin 4: Positive.
3. Menu Operation ⑴ Press “MENU” and it will display menu system ⑵ Revolve “OK” to select an item. The selected item will be highlighted display. ⑶ Press “OK” to enter the selected item. ⑷ Under menu system, press “MENU” to back to previous menu. *The menu will automatically save and quit if it remains idle. 3.
3.4 TITLE submenu Revolve "OK" button to select the letters, and press "OK" to input. Select SPACE to input space and DEL to delete the left letter. Max 10 letters are supported. After setting, press "MENU", the system will save data to current user and quit menu. The menu will automatically save and quit if it remains idle. 3.5 DISPLAY submenu The DISPLAY submenu is to select the items to be displayed on screen when ‘DISPLAY” button is pressed.
4. DB-9 Terminal Description The Multi-functional DB-9 port centralized DC power input, CVBS input, picture-in-picture switch on/off and TALLY light controlling. In your build-up EFP system, you can use only one DB-9 cable to input everything, instead of the complex cable work.
6. Specifications LCD Performance Size Display area Resolution Aspect ratio Brightness Contrast Color Viewing angle Video Format CVBS SMPTE-425M SMPTE-274M SDI SMPTE-RP211 SMPTE-296M SMPTE-125M ITU-R BT.656 HDMI General Input voltage Power consumption Working temperature Working humidity Storage temperature Storage humidity Dimensions Net weight (main body) 7 inches 153.6×90mm 1024×RGB×600 16:9/4:3 400cd m2 900:1 16.77 million colors Horizontal: 160 Vertical: 160 / ° ° ∕ NTSC PAL 1080p (60 / 59.