User Manual

S-2410C
LED Panel Light
Ver:B.2
Tel:[phone]
Fax:[phone]
http://www.swit.cc
E-mail: [e-mail]
USER MANUAL
S WIT E lec t r onics Co. , LT D.
Congratulations on your purchase of this product. Please read this user manual carefully.
Feature Appearance
Usage
Packing List
Specifications
Caution
Clean
1. 240pcs of ultra bright LEDs, 50,000hrs long life time;
2. Delicate in appearance, small in size, light weight and portable;
3. Heat-free technology and constant current circuit design
ensure consistent, stable, and accurate light output in various
environments;
4. 10% to 100% PWM digital integrated dimming, and the
5. LCD screen displays color temperature, brightness, and power
information;
6. It adopts LED side-emitting technology; the output light is
7. 3200K-5600K continuously adjustable;
8. It can be used for indoor and outdoor video and photography;
portrait photography; wedding photography; and especially
suitable for children photography.
Model
LED
Luminance
Beam angle
Color temperature
CRI
Power
Working voltage
Dimension
Weight
Standard
accessories
S-2410C
240PCS of ultra bright LEDs
1065 Lux @ 1m
75°
5600K±300K ～ 3200K±200K
96
60W
DC12V — 17V
Ф520x50mm
2.85kg
Power Adaptor（15V 90W）,
Power cable, Carrying case
1. Under normal circumstances, there is no need to change the
LED, pls do not disassemble the light randomly.
2. Never solder the LED bulbs by non-professionals
3. Pls remove the battery if long time no use.
4. Only use the provided adapter to avoid damage.
5. Never expose to rain or moisture.
6. Pls keep the front panel clean.
7. Only use the light in the temperature range of -10℃~40℃.
1. Please clean the front LED panel with soft dry cloth. If using
soft cloth with slight clean neutral detergent solution, please
wipe again with a soft dry cloth.
2. Do not use wet cloth, anhydrous alcohol, gasoline, or a
mixture of anhydrous alcohol and ether etc. to wipe the front
LED panel, otherwise it may cause damage to the front LED panel.
Fig 1 Fig 2
① Front Panel ② V-mount battery plate
③ Battery release button ④ CT dimming knob
⑤ DC in: 5.5x2.1mm, Polarity:
⑥ Brightness dimming knob
⑦ LCD screen ⑧ Handle
1. Install the light on the tripod or bracket, and tighten the
retaining bolt. Loose the rotary knob on both sides of the
2. Install one V-mount battery or two Sony F-mount DV batteries
or plug in the provided power adaptor to DC input socket,
then press the power button to work.
(Note: The above mentioned three kinds of power-supply
modes are in parallel connection, please avoid using both or
all of them at the same time to avoid malfunction like
battery protection.)
3. Adjust the brightness from 10% to 100% and the color
temperature from 3200K to 5600K according to actual
requirements.
4. The LCD screen displays the battery remaining capacity on
the right side, details are as below:
Four LEDs
Three LEDs
Two LEDs
One LED
No display
75%-100%
50%-75%
25%-50%
10%-25%
＜10%
Lack of power
Item
S-2410C
Power Adaptor
Power cable
Carrying case
Warranty card
User manual
Quantity
x1
x1
x1
x1
x1
x1