Operation Manual
Baby Calling" icon:
constantly alternating
in display
Out of range" icon
Channel: CH1, CH2
Baby Sleeping" icon (energy
save mode)
Battery icon:
full
half full
empty
44
6. LC display
7. Out of range
When the receiver is out of range, the flashing out of range alarm
icon appears in the receiver’s display. In addition, the receiver
also issues a recurrent acoustic signal. This acoustic alarm
always occurs when connection to the transmitter is interrupted.
8. Alarm
Visual and acoustic alarms are issued by the receiver when:
the connection between the receiver and transmitter is
interrupted or the transmitter is switched off.
the transmitter is set to a different channel from the receiver.
the transmitter is set to a different pilot tone from the receiver.
the batteries in the transmitter or receiver are too weak.
9. Belt clip
The transmitter unit and receiver unit are equipped with a belt
clip. It also serves as a positioning aid.