Operation Manual

4. Transmitter unit with 9 V power adapter plug (contained in the

material supplied) or with a 9 V battery.

5. Receiver unit with 9 V power adapter plug (contained in the

material supplied) or with a 9 V battery.

6. Receiver unit with volume control

7. Low power consumption and low HF radiation

8. Transmitter unit and receiver unit each with a belt clip

6 Starting Up

1. Inserting the batteries

 Only use batteries bearing the CE certificate

 Open the battery compartment as illustrated in Fig. II.

 Insert a 9 V battery in both the transmitter unit and the receiver

unit, paying attention to the correct polarity.

 Close the battery compartment.

 The batteries need not be removed from the transmitter/re-

ceiver unit when they are operated using the power adapter

plugs.

2. Operating using the power adapter plug

 Only use adapters which bear a CE certificate

 Connect the power adapter plug to the 9 VDC jack on the

transmitter unit and to the power socket.

 Connect the power adapter plug to the 9 VDC jack on the

receiver unit and to the power socket.

 Set the channel selector on the transmitter and receiver units to

the same channel (A or B).