Operation Manual

− SMS Text Messages −
111
9.9.2 Displaying mailbox/user data
NOTE: In order to configure the mailbox operation with the telephone network provider, you need the mailbox
ID (extension number). The general mailbox has the mailbox ID 0". When other users are registered,
the lowest mailbox ID available is automatically assigned (1−4).
1. Press the  button.
2. Use the  or  button to select the SMS" option in the display.
3. Press the  button.
4. Use the  or  button to select the Settings" option in the display.
5. Press the  button.
6. Use the  or  button to select the User" option in the display.
7. Press the  button.
8. Use the  or  button to select the required user in the display.
9. Press the  button. Enter the relevant password.
10. Press the  button.
11. Use the  or  button to select the Terminal Number" option in the display.
12. Press the  button. The terminal number is displayed.
NOTE: The terminal number displayed under Step 12 corresponds to the mailbox ID of the telephone network
provider.
13. Press the  button to move back one menu level at a time.
9.9.3 Sending an SMS message to a personal mailbox
NOTE: SMS mailboxes can only be used if the telephone network provider offers the facility. Please request a
configuration instruction manual on setting up mailbox operation from your telephone network provider.
In order to receive a text message in your personal mailbox, the sender must know your mailbox ID and append it
to your phone number.
You can send an SMS message to the receiving party containing information on your personal mailbox.
This SMS provides your SMS partner with your SMS call number including the current mailbox ID and it can be
stored in the phone book. If the mailbox ID is invalid, the SMS message will not be sent.
9.9.4 Changing mailbox/user data
1. Press the  button.
2. Use the  or  button to select the SMS" option in the display.
3. Press the  button.
4. Use the  or  button to select the Settings" option in the display.
5. Press the  button.
6. Use the  or  button to select the Users" option in the display.
7. Press the  button.
8. Use the  or  button to select the required user in the display.
9. Press the  button. Enter the relevant password.
10. Press the  button.
11. Use the  or  button to select one of the options to be changed.
12. Press the  button. Change the setting.
13. Press the  button. Other changes can now be made.
14. Press the  button to move back one menu level at a time.
9.9.5 Deleting a mailbox/user
1. Press the  button.
2. Use the  or  button to select the SMS" option in the display.
3. Press the  button.
4. Use the  or  button to select the Settings" option in the display.
5. Press the  button.
6. Use the  or  button to select the Users" option in the display.
7. Press the  button.
8. Use the  or  button to select the Delete User" option in the display.
9. Press the  button.
10. Use the  or  button to select the required user.
11. Press the  button. Enter the System PIN (default setting= 0000).
12. Press the  button.
13. Press the  button to move back one menu level at a time.