Operation Manual

Internal call
1. Press .
If only 2 devices are available the second one will ring right away. If there
are several registered cordless handsets, choose one and press .
Phonebook
The phonebook stores up to 100 entries.
You can find a phonebook entry by entering the first letter of the stored
name using the numeric keys. If necessary, use the arrow keys to select the
desired entry.
You can assign your phone book entries to a specific call group. You can set
different ring melodies for these call groups.
Create a new entry
1. In idle state press .
2. Press .
3. Select New entry and press .
4. Enter the name and press .
5. Enter the telephone number and press .
6. Select one of the call groups to which you want to assign the new entry and
press .
Using the phonebook
1.
Open the phonebook ( ) and select the entry with and .
- Make a call: Press .
- Edit an entry: Press , select Edit and press . Edit the name
if necessary and press . Edit the telephone number if necessary
and press . Edit the call group if necessary and press .
- View an entry: Press , select View and press . Press
and to view the details.
- Delete: Press , select Delete or Delete all and press .
Confirm the following query with .
- Check capacity: Press , select Capacity and press . You
will see the number of entries, for example “1 / 100“. That means 1
entry stored of 100 entries in total.
- Edit call groups: Press , select Edit group and press .
Select a call group and press . Select Rename group and press
, to edit the name of the call group
- or -
Select Set ringtone and press , to edit the ringtone for the call
group.
- Set speed dial: Press , select Speed dial and press . Press
the key, you want to assign the entry to, and press .
To dial with speed dialing, press and hold down the relevant key for
approx. 3 s.
Settings
Ringtones
1. In idle state press the menu key .
2. Select Sound and press .
3. Select Ringer and press .
- External: select the desired melody and press .
- Internal: select the desired melody and press .
- Ringer volume: select the volume and press .
- Silent: select Off, if the ringer should be switched off completely or se-
lect Beep, if you want to hear a short beep although the ringer is set to
off, and press .
Tones
1. In idle state press the menu key .
2. Select Sound and press .
3. Select Tones and press .
- Key beep: turn the key beep on or off and press .
- Confirmation: turn the confirmation tone on or off and press .
- Battery low: turn the low battery alert tone on or off and press .
- No coverage: turn the out-of-range alert tone on or off and press .
Set date and time
1. In idle state press the menu key .
2. Select Settings and press .
3. Select Dat/Time/Alarm and press .
4. Select Date/time and press .
- Time format: select the time format and press .
- Date format: select the date format and press .
- Enter time: enter the time and press .
- Enter date: enter the date and press .
Set alarm
1. In idle state press the menu key .
2. Select Settings and press .
3. Select Dat/Time/Alarm and press .
4. Select Alarm and press .
5. Select Alarm On/Off and press .
6. Select On or Off and press .
7. Select Enter time and press .
8. Enter the time and press .
9. Select Daily or Once and press .
10. Select Ringtone and press .
11. Select a melody and press .
Handset settings
1. In idle state press the menu key .
2. Select Settings and press .
3. Select Handset settings and press .
- Select base: if your handset is registered to several base stations, you
can select the active base with .
- Display: select Contrast and set the desired contrast
- or -
Select Handset name and, if necessary, change the name for the hand-
set.
- Language: select the display language.
- Auto answer: with this function activated, an incoming call is accepted
directly when you take the handset from the base station - you do not
need to press any key.
- Register handset: select a new base station, enter the PIN of the new
base station and perform the necessary steps at the base station.
Example: to register a new handset on the base station, press the page
button on the base station for approx. 5 s (beep). The PIN is in delivery
state "0000".
- De-register: Enter the PIN of the base station and select the handset
that you want to de-register. Answer the query with .
- Handset reset: You can reset the handset to delivery state. Enter the
PIN (in delivery state "0000") and answer the query with .
Base settings
1. In idle state press the menu key .
2. Select Settings and press .
3. Select Base settings and press .
- Ringer: select Ringtone and select the desired melody
- or -
select Ringer volume and select the volume.
- Dial mode: the standard dialling mode for analogue phones is "Tone". On
some older phone systems the dialling mode must be set to "Pulse".
Please see your phone system's user guide for more information.
- Flash time: select 100 ms, 300 ms or 600 ms. The use of supplemen-
tary services requires a flash signal of a specific length. You can obtain
information about available supplementary services and the required
flash time from your telephone service provider.
- System PIN: in delivery state, the system PIN is set to "0000".
- Base reset: you can reset the base station to delivery state. Enter the
PIN (in delivery state "0000") and answer the query with. .
Setting the memory keys
1. In idle state press the menu key .
2. Select Settings and press .
3. Select Memory Keys and press .
4. Select one of the direct dial keys from the list (M1/M2/M3/M4) and press
.
5. Enter the number to be stored on this key and press .
Help and support
Some issues may be resolved by simply disconnecting the power to the unit.
Switch off the power to the base station and remove the batteries in the handset
for about 20 minutes.
Reconnect everything to determine if the issue has been resolved.
Safety information
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury, including the fol-
lowing:
• Read and understand all the instructions.
• Follow all warnings and instructions marked on the product.
• Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
• Do not use this product near water (for example, near a bath tub, kitchen sink,
swimming pool).
• Do not overload wall outlets and extension cords as this can result in the risk
of fire or electric shock.
• Unplug this product from the wall outlet and refer servicing to your supplier
under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If the product does not operate normally by following the operating in-
structions.
• If the product has been dropped and the cabinet has been damaged.
• If the product exhibits a distinct change in performance.
• Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
• Do not use the telephone to report a gas leak in the vicinity of the leak.
• For pluggable equipment, the socket-outlet (power adaptor) shall be installed
near the equipment and shall be easily accessible.
Rechargable batteries
• Use only the supplied NiMH (Nickel Metal Hydride) batteries!
The operation periods for the handsets are only applicable with
the default battery capacities
• The use of other battery types or non-rechargeable batteries/pri-
mary cells can be dangerous. These may cause interference
and/or unit damages. The manufacturer will not be held liable for
damage arising from such non-compliance.
• Do not use third party charging bays. The batteries may be dam-
aged.
• Please note the correct polarity while inserting the batteries.
• Do not immerse batteries in water, do not place in fire.
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to the instruction. Must be
disposed of at the point of sale or at the appropriate collection
points provided by the public waste authorities.
Caution, risk of explosion if battery is replaced by an incor-
rect type. Dispose of used batteries according to the in-
structions.
Intended use
This phone is suitable for use on either a public telephone network or on an ap-
proved Private exchange (PABX). Any other use is considered unintended use.
Unauthorised modifications are prohibited. Do not attempt to carry out repairs
yourself.
Disposal
In order to dispose of your device, take it to a collection point provided by your
local public waste authorities (e.g. recycling centre). According to laws on the
disposal of electronic and electrical devices, owners are obliged to dispose of
old electronic and electrical devices in a separate waste container. The symbol
indicates that the device must not be disposed of in normal domestic waste!
Batteries represent a hazard to health and the environment!
Never open, damage or swallow batteries or allow them to pollute the environ-
ment. They may contain toxic, ecologically hazardous heavy metals. You are
legally required to dispose of batteries and rechargeable batteries safely, either
at a retailer that sells batteries or at an appropriate collection point that pro-
vides a suitable container. Never put batteries in the household waste. Disposal
is free of charge. Lithium batteries and battery packs of all kinds should be fully
discharged before you drop them off. Be sure to take precautions against short-
circuits, e.g. by covering poles with adhesive tape, to prevent the risk of a fire.
Packaging materials must be disposed of according to local regulations.
Guarantee
SWITEL equipment is produced and tested according to the latest production
methods. The use of carefully chosen materials and highly developed tech-
nologies ensures trouble free functioning and a long service life. The terms of the
warranty do not apply where the cause of the equipment malfunction is the fault
of the telephone network operator or any interposed private branch extension
system. The terms of the warranty do not apply to the rechargeable batteries or
power adaptors used in the products. The warranty period is 24 months from the
date of purchase.
All deficiencies resulting from material or production faults which occur during
the warranty period will be eliminated free of charge. Rights to claims under the
warranty terms are voided following intervention by the purchaser or third
parties. Damage caused as a result of improper handling or operation, incorrect
positioning or storing, improper connection or installation, Acts of God or other
external influences are not covered by the warranty.
In the case of complaints, we reserve the right to repair or replace defective
parts or provide a replacement device. Replaced parts or devices become our
property. Rights to compensation in the case of damage are excluded where there
is no evidence of intent or gross negligence by the manufacturer.
If your equipment shows signs of a defect during the warranty period, please re-
turn it to the sales outlet where you purchased the SWITEL equipment together
with the purchase receipt. All claims under the warranty terms in accordance
with this agreement must be asserted exclusively with regard to your sales out-
let.
The right to assert a warranty claim expires two years after the purchase of our
products.
Declaration of conformity
This device fulfils the requirements stipulated
in the EU directive: 2014/53/EU.
Conformity with the above mentioned directive is confirmed by the CE symbol
on the device. To view the complete Declaration of Conformity, please refer to
the free download available on our website www.switel.com/support.
Telgo AG, Route D’Agy 16, 1763 Granges-Paccot, Switzerland
Technical Detail
Standard DECT
RF frequency 1.89GHz
RF power average <10.4dBm
Power supply Input: AC 100-240V 50/60Hz
(Base and charger) Output: DC 6V 450mA
Range Indoor approx. 300m, Indoor approx. 50m
Standyby time Up to 100 hours
Talk time Up to 10 hours
Rechargeable battery AAA, 1.2V, 400mAh NiMH
Maximum earpiece volume +30dB
Dialling mode Tone (DTMF) / Pulse
Recall time (Flash) Short (100 ms), Medium (300 ms),
Long (600 ms)
Optimum ambient temperature 0˚C to 45˚C
Optimum relative humidity 20% to 80%
Power adaptor information
VTech (Qingyuan) Plastic & Electronics Co. Ltd.
Model : VT04EEU06045, Input 100-240V AC 50/60Hz 150mA, Output 6VDC
450mA (EU plug)
Shen Zhen Ruijing Industrial Co. Ltd.
Model : RJ-AS060450E002, Input 100-240V AC 50/60Hz 150mA, Output 6VDC
450mA (EU plug)
V1.1 / 12.2018