Operation Manual

57
Telephoning
128
Internal calls
1
Making internal calls
There must be two or more handsets (HS1, HS2, ...) registered on your base
station in order to make internal calls free of charge.
HS1: ,  or 
Call internal
, , e.g.:  Dial the internal call number of the
handset required
HS2:  Take the internal call on the other
handset
HS1/HS2:  End the internal call
Forwarding external calls internally
HS1: ,  or 
Call internal
, , e.g.:  Dial the internal call number of the
handset required during the external call
HS2:  Take the internal call on the other
handset
HS1:  Transfer the call
If the handset called does not answer, take the external call back by
pressing the  button.
Holding a call / brokering
While a call is in progress, it is possible to dial another handset in order to con-
sult with someone. The external caller is put on hold while you converse with the
second, internal person called. You can switch between the callers as often as
necessary.
HS1: ,  or 
Call internal
, , e.g.:  Dial the internal call number of the
handset required during the external call
HS2:  Take the internal call on the other
handset
HS1: ,  or 
Switching
,  Switch between the callers
1
Internal calls are only possible when at least two handsets are registered in
the system;  Checking the contents of the package" on Page 120.