Operation Manual
76
Standby mode
All descriptions in this operating manual assume that the handset is in
Standby mode. Switch the system to Standby mode by pressing the
button.
Navigating in the menu
All the functions can be accessed via the various menus. Use the
button and the arrow buttons to navigate through the menu. Use the arrow
buttons and to scroll through the menu options. Press the
button to open a menu. If you want to move one menu level back,
press the button briefly.
5 Telephoning
Taking a call
Your telephone rings.
If the handset is not in the base station:
Press the Off Hook button.
Making a call
Enter the phone number. Delete any wrong entries by
pressing .
The phone number is dialled.
The digits then entered are dialled immediately. It is not possible
to correct wrong digits individually using this dialling procedure.
It is also possible to press the Off Hook button first to obtain the
dialling tone.
Ending a call (on−hook)
/ Press the On Hook button or replace the handset in the
base station.
Redialling
The telephone stores the last 3 phone numbers dialled. If a
phone book entry has been set up for the phone number, the
name is displayed.
Open the redialling list.
/ Select an entry from the list.
The phone number is dialled.