Operation Manual

27
Putting the Telephone into Operation
39
2 Putting the Telephone into Operation
Safety information
Caution: It is essential to read the Safety Information in Chapter 1 before
starting up.
Checking the contents of the package
The package contains:
− a base station with power adapter plug − a telephone connection cable
− a handset − a rechargeable battery pack
− an operating manual
Connecting the base station
Caution: Position the base station at least 1 m away from other electronic
devices, otherwise there is a risk of mutual disturbance.
Connect the base station as illustrated in the diagram. For reasons of safety, only use
the power adapter plug supplied and telephone connection line enclosed.
Mains power outlet
Telephone line socket
Inserting the rechargeable batteries
Insert the battery pack in the open battery
compartment and plug the connector in the
connection socket. When replacing the bat-
tery pack, only use one of the same type.
Close the battery compartment.
Charging the batteries
Before the handset is used for the first time, insert it in the base station/charging station
for at least 15 hours. When the handset is inserted in the base station/charging station
properly, the charge control lamp lights up. The handset warms up during the charging
process. This is normal and does not represent a risk. Do not charge the handset with
charging units from other manufacturers. The current battery charge status is indica-
ted on the display:
Full Half empty Low Empty