Operation Manual

120
14. Private Branch Exchanges
R button on private branch exchanges
If the telephone is connected to a private branch exchange, functions such
as transferring calls and automatic call back can be used via the R button.
Please refer to the operating manual supplied with your private branch
exchange to determine which recall (Flash) time must be set in order to
use these functions. The dealer where you purchased the exchange can
provide information as to whether the telephone will work properly with the
exchange.
Setting the Recall time, telephone base
Two recall timings are available. Short 100ms and Long 300ms.
, or ,
Open the Menu, select ‘Settings’
or ,
Select ‘Recall’
Short
The current setting is shown
or ,
Select and confi rm ‘Short’ or ‘Long’
Setting the Recall time, cordless handset
Two recall timings are available. Short 100ms and Long 300ms.
, or ,
Open the Menu, select ‘RECALL’
SHORT The current setting is shown
or ,
Select and confi rm ‘SHORT’ or ‘LONG’
Dialling pause
In the case of private branch exchanges, it is necessary to enter an access
code to get an outside line with its corresponding dialling tone. When
using some older private branch exchanges, it takes a little time before the
dialling tone becomes available. Particularly in the case of such private
branch exchanges, it is possible to insert a dialling pause after the number
for the outside line so that the number can be dialled in a continuous
process without having to wait for the dialling tone.
Telephone base
,
Enter digit/s, Insert a dialling pause.
‘P’ is shown in the display.
Cordless handset
2 sec
Insert a dialling pause. ‘P’ is shown
in the display.
The pause can also be entered with the phone number in the phone book.
Private Branch Exchanges
GB
Switel DCT6172C Combo copy.indd 120 13/6/08 15:14:02