Operation Manual

10
11
17
Answer delay
You can select from 2 to 9 ringing tones or the TS (Time Saver) setting for
pre−remote access free of charge.
Pre−remote access means: If new messages have been recorded on your
answering machine, your call is taken after 2 rings. If no messages have
been recorded, the call is taken after 6 rings. Place the receiver on−hook
before the 6th ring. This means that no charges ensue.
To open the Answer Delay menu, proceed as follows:
, y/z,
TAM SETTINGS
, ®, y/z,
ANS DELAY
, ®. Press y/z to select the required number of
rings. Confirm by pressing ®.
Remote access
Call your own phone number. Press the  button while the outgoing
message is being played. Enter your security code (default setting: 000).
Other functions can now be started. If the answering machine is not
switched on, it takes the call after the 20th ring.
Function Button
Play all the messages 2
Play the new messages 3
Play the previous message 4
Delete messages 5
Play the next message 6
Answering machine on/off 7
OGM menu 8
Change the security code (default setting 000) 9
Play the main menu 1
Operating using the base station
The answering machine provides voice prompts. Please pay attention to
the instructions and information.