Operation Manual

GB
11
Preliminary Information
Standby mode
All descriptions in this operating manual assume that the handset is in Stand-
by mode. The system switches to Standby mode by pressing the but-
ton.
Low-radiation operation (MAXI ECOmode)
During a call the transmission power will be reduced according to the distance
between handset and base.
You can set the base to switch off the transmitter completely after approx. 60 s
when there is no active call and all the handsets are in idle mode (FULL ECO
= on).
In addition you can reduce the transmitting power generally to ECO RANGE/
HALF RANGE, which is approx. 25% of the max. transmission power.
Navigating in the menu
All the functions can be accessed via the various menus. The entire menu
structure can be found in the appendix.
The softkeys and the arrow keys are used for navigation in the menu.
The menu is opened with the left softkey .
Use the arrow keys and to move within the menu
Press the softkey to open a sub menu.
To return to the main menu press briefly. With a long press you will
return to the standby state.