Operation Manual

35
Putting the Telephone into Operation
53
Connecting the charging station
1
Connect the charging station as illustrated in the
diagram. For safety reasons, only use the power
adapter plug supplied.
Inserting the batteries
Insert the batteries in the open battery compartment. Only
use batteries of the type AAA Ni−MH 1.2 V. Pay attention to
correct polarity. Close the battery compartment cover.
Charging the batteries
Before the handset is used for the first time, insert it in the base station / charging
station for at least 14 hours.
When the handset is inserted in the base / charging station properly, you will hear a confirmation
signal and the charge control lamp lights up. The handset warms up during the charging process.
This is normal and does not represent a risk. Do not charge the handset with charging units from
other manufacturers. The current battery charge status is indicated in the display:
Full Half empty Low Empty
1
Only applies to telephone sets with at least two handsets;  Checking the package con-
tents" on Page 52.
Mains power outlet