Operation Manual

1
CLIP: Calling Line Identification Presentation = Displays the
caller’s phone number.
In Case of Problems
78
11 In Case of Problems
Service Hotline
Should problems arise with the telephone, please refer to the follow-
ing information first. In the case of technical problems, you can con-
tact our hotline service, Tel. 0900 00 1675 within Switzerland (Swiss-
com fees at time of going to print: CHF 2.60/min). In the case of
claims under the terms of guarantee, please contact your sales outlet.
There is a 2 year period of guarantee.
Problems and solutions
Problems Solutions
No connection to base
station possible
Check that the handset has been
registered on the base station
with the correct PIN code;
Page 74.
No telephone calls possible The telephone is not connected
properly or is defective. Only use
the telephone connection cable
supplied.
Test whether the telephone con-
nection is in order by using an-
other telephone.
The power adaptor plug is not
plugged in or there is a complete
power failure.
The rechargeable battery pack is
empty or defect.
The handset is too far from the
base station.
The wrong dialling mode is set;
Page 74.
Connection is disturbed or
cut off
The handset is too far from the
base station.
The base station is in an unsuita-
ble location.
The system no longer
responds
Return all the functions to their
default status using the RESET"
function; Page 74.
Disconnect the power adapter
plug briefly from the power sok-
ket.
The battery pack is empty
in a short time
The battery pack is empty or de-
fect.
Place the handset in the base sta-
tion properly. Clean the contact
surfaces on the handset and base
station with a soft, dry cloth.
Place the handset in the base sta-
tion for 16 hours.
The caller number display
(CLIP
1
) does not function
The caller number display (CLIP)
is a supplementary service offe-
red by your telephone network
provider. Contact your network
provider for further information.
The caller has suppressed the
transmission of their phone num-
ber.