Operation Manual

107
outlined characters. The relevant base is marked with
a *.
ë Enter the relevant PIN for the base, the new handset
should be registered on, and press OK.
c Press and hold down the paging key on the base
station until a short beep is to be heard (approx. 5 sec).
After a few seconds the antenna icon on the display is
on. The handset is registered.
Deleting a handset
Menu Press the Menu softkey.
F / H Select Base Settings and press Select.
F / H Select Delete HS and press Select.
ë Enter the relevant PIN (default 0 0 0 0) and press OK.
F / H Select a handset and press Select.
You cannot de−register the handset you are currently using.
11 PBX / Supplementary Services
PBX
If the telephone is connected to a private branch exchange, functions such
as transferring calls and automatic call back can be used via the R button.
Refer to the operating manual provided with your private branch exchange
as to which Flash time must be set in order to use these functions. The sa-
les outlet where you purchased the exchange can provide information as to
whether the telephone will work properly with the exchange.
Please remember to enter the access code and a neccessary dialling
pause (a long press ˆ0˜) when creating phone book entries.
Supplementary services
Your telephone supports supplementary services provided by your tele-
phone network provider, such as brokering, call waiting and conference fa-
cilities. These supplementary services can be used via the R−button.
Please contact your telephone network provider regarding which Flash time
must be set to use the supplementary services. Contact your telephone
network provider with regard to enabling supplementary services.