Operation Manual

78
79
Telephoning
72
5 Telephoning
Taking a call
,  or  Take the call
Ending a call
or  End the call
Switching the handset off and on
You can switch the handset off to save the batteries.
3 sec.
Switch the handset off
2 sec. Switch the handset on
Making a call
 Enter the phone number (max.
24 digits)
Clear
Delete the last digit if incorrect
 Dial the phone number
It is also possible to press the Call button /Handsfree button
 first and wait for the dialling tone. The digits then entered
are dialled immediately. It is not possible to correct wrong digits
individually using this dialling procedure.
Redialling
The telephone stores the last 20 numbers dialled in a redialling list. For
further information,  Page 75.
 Open the redialling list
 or ,  Select the entry required and dial it
Calling back calls received
The telephone stores the numbers of the last 30 calls received in a call list,
 Page 74.
New calls are marked by a *.
 Open the call list
 or ,  Select the entry required and dial it
Dialling numbers from the phone book
Phone numbers must have been stored in the phone book for this
function,  Pages 71 and 74.
PB
Open the phone book
 or   Select the entry required and dial it
Internal calls
1
Making internal calls
There must be two or more handsets (HS1, HS2, ...) registered on your
base station in order to make internal calls free of charge.
HS1: ,
 or ,
Select
Dial the internal call number of the
handset required
HS2:  Take the internal call on the other
handset
HS1/HS2:
End the internal call
Forwarding external calls internally
HS1: ,
 or ,
Select
Dial the internal call number during the
conversation with the external caller
HS2:  Take the internal call on the other
handset
HS1:
Forward the call
1
Internal calls are only possible when at least two handsets are registe-
red in the system; Checking the contents of the package" on Page
67.