Operation Manual

25
GB
Setting the telephone
Direct call
Menu Press the Menu softkey.
/ Select Settings and press OK.
/ Select HS settings and press OK.
/ Select Direct call and press OK.
Enter the System PIN (in delivery state 0 0 0 0) and press
OK.
/ Select one of the following options and confirm with OK:
Direct call Switch the direct call on or off. After having switched it to “on“
you will be asked to enter a telephone number.
After pressing Option you can select an entry from the tele-
phone book, the call list or the redial list.
If direct call is activated pressing any key (without the Option
softkey) will dial the programmed telephone number.
☞ To deactivate the direct call press Option, enter the PIN and press OK.
Then you can set the direct call to “off“.
Select a base station
Menu Press the Menu softkey.
/ Select Settings and press OK.
/ Select HS settings and press OK.
/ Select Select base and press OK.
/ Select a base and press OK.
☞ Only base stations are shown your handset is already registered to.
Setting the display
Menu Press the Menu softkey.
/ Select Settings and press OK.
/ Select HS settings and press OK.
/ Select Display and press OK.
DF891_GB 15.08.2008 11:53 Uhr Seite 25