Operation Manual

GB
29
Setting the telephone
Setting the display contrast
Menu Press the Menu softkey.
/ Select HS Settings and press Select .
/ Select
Contrast and press Select .
/ Select a contrast level and press
Select .
Setting Auto Answer
Menu Press the Menu softkey.
/ Select HS Settings and press Select .
/ Select
Auto Answer and press Select .
/ Select whether the automatic answer function will be on or off
and confirm with
Select .
☞ If Auto Answer is on an incoming call will immediately be taken when
the handset is taken from the base.
Setting Call Barring
Menu Press the Menu softkey.
/ Select HS Settings and press Select .
/ Select
Call Barring and press Select .
Enter the relevant PIN (default 0 0 0 0) and press
OK .
/ Select one of the following options and confirm with
Select :
Barring Mode Switch call barring on or off.
Barring Number Select an entry and enter a max. 4 digit number. If barring
mode is set to on, your phone will check the first 4 digits of
the dialling number with the set bar numbers.
☞ If barring mode is set to on “Call barred” will be shown in the idle dis-
play. If the dialling number matched with any one of the set bar numbers,
the dialling procedure will be aborted with a beep.
DF911_GB 10.11.2008 10:52 Uhr Seite 29