Operation Manual

PABX / Supplementary Services

Babysit

You need two handset to use this function.

Place one of the handsets in the room you wish to monitor. Activate the the function on this

handset. No further internal or external calls are signalled by this handset from this point.

You can then establish a connection to this handset from a second handset and monitor the

room acoustically. Dialling the internal phone number of the handset placed in the room

starts room monitoring. Room monitoring is stopped again by either putting the phone down

or pressing the Call button.

Touch & dial

Use this function to store a set phone number that will be dialled automatically when any

button (except ) is pressed.

Call barring

Use this function to ban certain phone numbers from being dialled. The call barring numbers

must be entered separately for each handset. You can specify bar calls to up to 4 numbers

each comprising up to 4 digits. All phone numbers whose first digits match the specified

numbers will be barred. A useful benefit of this function is to bar international or long−dis-

tance calls, for example. Example: Call barring = 0185. All numbers beginning with 0185 will

be barred. Numbers beginning with 0180, 0181, 0188, ..., will be dialled.

Intrusion mode

Enabling the INTRUSION function (see Menu Structure") allows you to link in handsets to

the call made with another handset by pressing ¾ on the "intruding" handset.

10 PABX / Supplementary Services

R−functions on private branch exchanges

If your telephone is connected to a private branch exchange, functions such as call forward-

ing or automatic call back can be used via the R−functions. Refer to the operating manual

provided with your private branch exchange as to which Flash time must be set in order to

use these functions. The sales outlet where you purchased the exchange can provide in-

formation as to whether the telephone will work properly with the exchange. The Flash time

is set using the menu. Refer to Page 15 for the sequence of menu option selections.

R−functions and supplementary services

Your telephone supports supplementary services provided by your telephone network pro-

vider, such as brokering or conference calls. These supplementary services can be used by

implementing the R−functions. Please contact your telephone network provider regarding

which Flash time must be set to use the supplementary services. Contact your telephone

network provider with regard to enabling supplementary services. The Flash time is set

using the menu. Refer to Page 15 for the sequence of menu option selections.

To enable the R−functions while making an external call:

,  or 

INIT 2NDCALL

,  Select the R−functions

 or 

SWITCH CALLS

CONFERENCE

,  Select and activate the function