Operation Manual

Technical Properties
19
The system no longer responds Reset all the functions to their default settings;
Page 15.
Disconnect the power adapter plug briefly from the
power socket.
The batteries are empty within a
short time
The batteries are empty or defective.
Place the handset in the base station properly.
Clean the contact surfaces on the handset and
base station with a soft, dry cloth.
Place the handset in the base station for 14 hours.
The caller number display (CLIP
3
)
does not function
The caller number display (CLIP) is a supplemen-
tary service offered by your telephone network pro-
vider. Contact your network provider for further in-
formation.
The caller has suppressed the transmission of their
phone number.
13 Technical Properties
Technical data
Feature Value
Standard DECT
1
−GAP
2
Power supply (base station) Input: 100−240 V AC, 50/60 Hz
Output: 7.5 V, 300 mA
Power supply (charging station) Input: 100−240 V AC, 50/60 Hz
Output: 7.5 V DC, 200 mA
Range Outdoors: Approx. 300 m
Indoors: Approx. 50 m
Standby time Up to 100 h
Max. talk time Up to 10 h
Rechargeable batteries 2 x AAA NiMH 1.2 V
Dialling mode Tone dialling mode
Pulse dialling mode
Permissible ambient temperature 10°C to 30°C
Permissible relative humidity 20% to 75%
Flash function 100 ms, 250 ms, 600 ms
1
DECT: Digital Enhanced Cordless Telecommunication = Standard for cordless telephones.
2
GAP: Generic Access Profile = Standard for the interoperation of handsets and base sta-
tions from different manufacturers.
3
CLIP: Calling Line Identification Presentation = Displays the caller’s phone number.