Operation Manual

In the Case of Problems
157
Problems Solutions
The batteries are
empty in a short
time
− Batteries are empty or defective.
− Place the handset in the base station properly. Clean
the contact surfaces on the handset and base station
with a soft, dry cloth.
− Place the handset in the base station for 16 hours.
The CLIP
1
function
does not work
− The caller number display function is an optional
service offered by telephone network providers. Con-
tact your network provider for further information.
− The caller has suppressed the transmission of their
phone number.
The answering ma-
chine no longer
records messages/
memos
− Ensure that the answering machine is connected
correctly and switched on.
− Check whether the answering machine memory is
full. Delete messages from the memory, if necessary.
 Page 140
No remote access
functions can be
executed
− Check that the correct PIN code has been entered
for the remote access.  Page 142
− The telephone used for remote access must be set
to tone dialling.
1
CLIP: Calling Line Identification Presentation