Operation Manual

SMS
153
10 SMS
Conditions for using SMS
The CLIP
1
feature must be available for your telephone connection. Contact your
telephone network provider to ensure this feature is enabled on your telephone
connection. To use the SMS
2
service, your telephone network provider must ena-
ble it.
S A text cannot be sent from every private branch exchange extension.
Ifyouwanttosend SMStext messagesfrom a private branchexchange
extension,itisnecessary tostore thenumberforan outsideline foryour
PBX in the handset preceding the Service Center number.
S Sending SMS messages is not available for Call-by-Call connections at
present.
S Charges are made for sending SMS texts.
S If the recipient in the conventional telephone network does not use an SMS
service or his telephone is not equipped to handle SMS messages, the SMS
is automatically converted to a voice message.
S Costs are charged by your telephone network provider.
SMS Service Center
SMS messages are distributed via a Service Center. If you want to send SMS text
messages, you must program a service center number in your handset . Page
146. Please contact the provider of your choice for the necessary service center
call numbers and the procedure for enabling the SMS service.
Yourtelephone hasalreadybeenpreparedtosendSMStextmessages.
Service Center numbers are already programmed in the handset.
Activate the required Service Center in the SMS menu. . Page 147
Service Center 1 Service Center 2
Swisscom: 0622100000 Cablecom: 0435375370
Service Center 3 Service Center 4
Empty Empty
1
CLIP: Calling Line Identification Presentation
2
SMS: Short Message Service