Operation Manual

PBX / Supplementary Services
109
If new messages have been recorded, the recorded message indicator flashes.
LA This appears when a handset is being used to
adjust answering machine settings.
An/03 This appears when a message is being
recorded (number alternates with the total
number of recorded messages, e.g.: 03).
8 PBX / Supplementary Services
R−button on private branch exchanges
If the telephone is connected to a private branch exchange, functions such as transferring
calls and automatic call back can be used via the R button. Refer to the operating manual
provided with your private branch exchange as to which Flash time must be set in order to
use these functions. The sales outlet where you purchased the exchange can provide infor-
mation as to whether the telephone will work properly with the exchange. The Flash time is
set using the menu. Refer to Page 112 for the sequence of menu option selections.
Entering a dialling pause manually
It is possible to insert a dialling pause manually after the number for an outside line to be
able to continue dialling directly without waiting for the dialling tone.
2 sec.  Insert a dialling pause
The actual phone number is dialled a certain time after the number for an outside line.
The dialling pause can also be entered with the phone numbers in the phone
book.
R−button and supplementary services
Your telephone supports supplementary services provided by your telephone network provi-
der, such as brokering, call waiting and conference facilities. These supplementary services
can be used by implementing the R button. Please contact your telephone network provi-
der regarding which Flash time must be set to use the supplementary services. Contact
your telephone network provider with regard to enabling supplementary services. The Flash
time is set using the menu. Refer to Page 112 for the sequence of menu option selections.
Caller number display (CLIP
1
)
The caller number display function is a supplementary service offered by tele-
phone network providers. Contact your network provider for further information.
If this function is available with your telephone line, the number of the caller appears in the
display when the phone rings. If the caller has suppressed transmission of his phone num-
ber, the corresponding message appears in the display. The phone number is not displayed
and, as a result, is not stored in the call list.
1
CLIP: Calling Line Identification Presentation = Display the caller’s phone number.
2
VMWI: Visual Message Waiting Indication = Visual indicator that new messages have
been recorded.