Operation Manual

Special Functions
114
10 Special Functions
Dialling mode
The telephone can be operated in analogue exchanges (PULSE mode) as well as new, digi-
tal exchanges (TONE/DTMF mode). The dialling mode is controlled via the menu. Refer to
Page 112 for the sequence of menu option selections.
Temporary tone dialling
If you only operate the telephone using the PULSE dialling mode, you can still make use of
the advantages of TONE dialling mode (e.g.: remote access of the answering machine in
the telephone network). You can temporarily switch to Tone dialling when a connection has
already been made.
Press the button during the call
When the call is ended, the equipment automatically switches back to Pulse dialling.
Alarm
The Alarm clock" function can be used so that you are alerted by the handset at a specific
time. Refer to Page 111 for the sequence of menu option selections.
Call barring
The call barring function prevents call numbers, which you have programmed, from being
dialled. You can define four numbers, each comprised of 4 digits, to be barred. Refer to
Page 111 for the sequence of menu option selections.
SOS numbers
You can store up to 3 phone numbers which can still be dialled even when the call barring
function is activated. Refer to Page 111 for the sequence of menu option selections.
Example
017" has been programmed in the call barring facility. All phone numbers beginning with
017" are barred (0170 − 0179). 0173" is saved as an SOS number. As a result, it is possi-
ble to dial phone numbers which begin with "0173" despite the fact that call barring is activa-
ted.
First ring
If you set this function to Off", the CLIP data appears in the display at the first audible ring
you hear of an incoming call. Refer to Page 111 for the First Ring menu option.
Copying the phone book
The phone book can be copied from one handset to another. This function is only available
when more than one handset is registered on the base station.
Menu
Open the menu
 / 
Phonebook ,
Select
Select the phone book, confirm
 / 
PB Transfer
,
Select
Select PB Transfer and confirm it