Operation Manual

92
Telephoning
99
It is also possible to press the Call button /Handsfree button  first and
wait for the dialling tone. The digits then entered are dialled immediately. It is not
possible to correct wrong digits individually using this dialling procedure.
Redialling
The telephone stores the last 20 numbers dialled in a redialling list. For further information,
 Page 102.
 Open the redialling list
 or ,  Select the entry required and dial it
Calling back calls received
The telephone stores the numbers of the last 30 calls received in a call list,  Page 101.
New calls are marked by a *.
 Open the call list
 or ,  Select the entry required and dial it
Dialling numbers from the phone book
Phone numbers must have been stored in the phone book for this
function,  Pages 98 and 101.
PB
Open the phone book
 or   Select the entry required and dial it
Internal calls
1
Making internal calls
There must be two or more handsets (HS1, HS2, ...) registered on your base station in or-
der to make internal calls free of charge.
HS1: , Dial the internal call number of the handset
 or ,
Select
required
HS2:  Take the internal call on the other handset
HS1/HS2:
End the internal call
Forwarding external calls internally
HS1: , Dial the internal call number during the
 or ,
Select
conversation with the external caller
HS2:  Take the internal call on the other handset
HS1:
Forward the call
Holding a call / brokering
While a call is in progress, it is possible to dial another handset in order to consult with so-
meone. The external caller is put on hold while you converse with the second, internal per-
son called. You can repeat this procedure as often as required.
1
Internal calls are only possible when at least two handsets are registered in the sy-
stem; Checking the contents of the package" on Page 92.