Operation Manual

6
Switching the back-lighting on/off
Æ
 Totalreceivedtime  Phonesettings
Æ  LCDBacklightsetting
Switching the key back-lighting on/off
Æ
 Totalreceivedtime  Phonesettings
Æ  KeyBacklightsetting  / [Set]
Restoring the factory settings
You need the phone code to restore the factory settings. The phone
code is set to 1234 at the factory.
Æ
 Totalreceivedtime  Factorysettings
Æ  [Enter phone code] [Confirm prompt]
Call settings
Transferring calls
You can redirect incoming calls to other phone numbers. Before doing this, you
must define whether you want to divert all calls or only certain calls, e.g. those
which receive a busy line signal.
Setting up call transfer
Æ  Totalreceivedtime  Networksettings
Æ  Calltransfer  Divertalways / Whenbusy /
Volumeadjust/ Unreachable  Activate
Æ  [Enter phone number]
Deactivating individual call transfers
Æ  Totalreceivedtime  Networksettings
Æ  Calltransfer  Divertalways / Whenbusy /
Volumeadjust/ Unreachable  Deactivate
Deactivating all call transfers
Æ  Totalreceivedtime  Networksettings
Æ  Calltransfer  Cancelall
Barring calls
This function inhibits outgoing and incoming transmissions according to specific
conditions defined. E.g. you can reject incoming calls when you are abroad.
This service must be supported by your mobile service provider and you
also require the network code of your mobile service provider. Additional
costs could ensue.
Æ
 Totalreceivedtime  Networksettings
Æ  Callrestrict  Internationalcalls / Allexcepthome /
Incomingcalls/ Incomingifabroad / Outgoingcalls
Æ  Allservices / Voicecalls / Data / Fax/ Messages /
Noreply  Activate
Æ  [Enter network code]
Activating/Deactivating call waiting
This function issues an audible signal to inform you that another call has been
received while the current call is in progress.
Æ
 Totalreceivedtime  Networksettings
Æ  Callwaiting  Activate / Deactivate
SMS settings
Changing the SMSC number
The SMSC number defines the message centre through which SMS messages
are transmitted. Normally, this setting is assumed from the SIM card.
Æ
 SMS  Messagecenter
Æ  [Enter/Change SMSC number]
Request status report
Æ  SMS  Statusreport
Æ  ON/ OFF
Displaying the SMS memory status
Æ  SMS  Usedspace
Security settings
The PIN is supplied together with the SIM card by your mobile service
provider.
Switching the PIN password on/off
Æ  Totalreceivedtime  PINpassword
Æ  ON/ OFF
Æ  [Enter PIN1]
Changing PIN1
Æ  Totalreceivedtime  PINpassword
Æ  ChangePIN1
Æ  [Enter old PIN1]
Æ  [Enter new PIN1]
Æ  [Confirm new PIN1]
Switching the automatic key lock on/off
Æ  Totalreceivedtime  Phonesettings
Æ  Autolockkeypad  ON / OFF
SOS (emergency call) settings
You can assign up to 5 phone numbers which are repeatedly called in succes
sion after starting an SOS call until one of the numbers takes the call.
It is also possible to compile an SOS text message which is sent together with
the SOS calls.
Entering SOS numbers
Æ  Totalreceivedtime  Phonesettings
Æ  SetSOS  SOSnumber  New
Æ  [Select memory location]  [Enter SOS number]
Changing SOS numbers
Æ  Totalreceivedtime  Phonesettings
Æ  SetSOS  SOSnumber  Editrecord
Æ  [Select SOS number]  [Edit SOS number]
Deleting SOS numbers
Æ  Totalreceivedtime  Phonesettings
Æ  SetSOS  SOSnumber  Deleterecord
Æ  [Select SOS number] [Confirm prompt]
Preparing the emergency text message
Æ  Totalreceivedtime  Phonesettings
Æ  SetSOS  Emergencymsg
Æ  [Write SOS text]
Switching the SOS function on/off
Æ  Totalreceivedtime  Phonesettings
Æ  SetSOS  SOSnumber  Status
Æ  ON/ OFF
Triggering an SOS call
Æ 3 sec.
Ê An acoustic signal is sounded
Ê If you have prepared an emergency text message, it is sent
Ê The SOS numbers stored are dialled in succession.
Ê When the SOS call is taken, the acoustic signal stops and the call is switched
to handsfree mode.
Ending the SOS call
Æ