Operation Manual

20
21
22
Operating the Walkie−Talkies
48
4 Operating the Walkie−Talkies
Display and notation of operating sequences
P Press the button depicted
2 sec M Press the button depicted for 2
seconds
2 x M Press the button displayed twice
a, P Press and hold the button displayed
b, P Release the button displayed
ð Speak into the microphone
Display illumination
The display lights up for 4 seconds after pressing any button, ex-
cept the P button.
Switching the walkie−talkie on/off
a V Switch the walkie−talkie on
An acoustic signal is issued. The current channel setting
appears in the display.
a V Switch the walkie−talkie off
Volume control
+ or , Raise or lower the volume
Transmitting and receiving
Transmitting
a P ð Transmit
Hold the walkie−talkie approx. 5 to 7 cm from your mouth
and speak at a normal volume. In order to talk to other sub-
scribers, the respective walkie−talkies must be set to the
same channel.
Receiving
b, P Receive
Radio signals cannot be received when the P button
is being pressed.