User's Manual
Table Of Contents
- SWORD Health User Manual
- Getting to know SWORD Phoenix
- 1 - Introduction
- 2 - Indications, Contraindications and Adverse Events
- 3 - Candidate Selection
- 4 - Components
- 5 - Digital Therapist Kits
- 6 - Setup
- 7 - Motion Trackers
- 8 - Patient’s Card
- 9 - Straps
- Phoenix Portal
- 10 - Create a User Account
- 11 - Accessing the Portal
- 12 - Getting to Know the Portal
- 13 - Patient List
- 14 - Add a New Patient
- 15 - Patient Screen
- 16 - Prescription
- 17 - Prescribe a Session
- 18 - Set Exercise Difficulty Level
- 19 - Patient Results
- 20 - Patient Profile
- 21 - Overview
- 22 - Daily Summary
- 23 - Send Messages
- 24 - Settings
- Digital Therapist
- 25 - Turn On the Digital Therapist
- Support
- Technical specifications
- 34. Service and inspections
- 35. Regulatory Statements
112
34. SERVICE AND INSPECTIONS
Cleaning
General rules when cleaning the outside of SWORD Phoenix and its components:
Digital Therapist (Tablet):
● Make sure SWORD Phoenix is unplugged from the power supply before cleaning.
● Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner
or benzene, abrasive cleaners or compressed air.
● To clean the tablet, use a cloth lightly dampened with a mild detergent.
● Avoid getting liquids inside the touchscreen. If liquid does get inside, have a qualified
service technician check it before you power it on again.
● Do not wipe the screen with a cloth or sponge that could scratch the surface.
● To clean the touchscreen, use window or glass cleaner on a clean cloth and wipe the
touchscreen. Never apply the cleaner directly on the touchscreen.
Motion Trackers:
● Make sure the motion trackers are unplugged from the power supply before cleaning.
● Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner
or benzene, abrasive cleaners or compressed air.
● To clean the trackers use a cloth lightly dampened with a mild detergent.
● Avoid getting liquids inside your touch monitor. If liquid does get inside, have a qualified
service technician check it before you power it on again.
SWORD Phoenix Straps cleaning and care
Do not place in a washing machine or dryer as this may damage the material. Handwash with
warm water. Use a mild detergent if soiled. Rinse well. Gently squeeze out excess water. Air dry,
foam side up, on rack or towel or hang to dry. It is best to wash regularly to keep the material
clean and free of body salts, oils, etc. This will help extend the material’s life.