Operating instructions
Operating Instructions
www.snopakebrands.com
6
Installation
• Make sure the waste basket is securely in place
• Connect the electricity plug to any standard power socket
Operation
The switches on your Sword sh shredder enable you to select the followings settings:
• Power On/O - With the electrical cord plugged in and the shredder waste bin properly in place, the blue ready LED
will light up inside the POWER switch
• Fwd - with this setting the shredder is automatically started by inserting paper or a CD/DVD into the feed slot
• Rev - in the unlikely event of paper jam, the reverse setting can be used to help clear the cutters of paper that has not
passed through properly
Capacity
This Sword sh shredder will shred:
• up to 10 sheets of 80gsm paper per pass, with a max width of 220mm
• Single credit cards passed through the middle of the paper feed opening
• Single CDs or DVDs through designated CD/DVD feed slot
• The waste bin has capacity for approximately 120 sheets. When red bin full LED is illuminated the shredder will stop
operating until bin has been emptied
Continuous shredding should not last more than 3 minutes, after which the shredder should be allowed to cool down
for 20 minutes before continuing. If the shredder is used continuously for more than 3 minutes, the shredder will
automatically switch itself o . After an auto power o , put the switch into the o position for 50 minutes before turning
the shredder back on.
In case of a minor paper jam:
Grasp the excess paper from the top and pull it out as you press rev button.
In case of a major paper jam:
The shredder will automatically switch itself o . After an auto power o , put the switch into the o position for 50
minutes before turning the shredder back on. Grasp the excess paper from the top and pull it out as you press the rev
button.
Warning
• Do not place ngers too close to the feed slot as serious injury may occur
• Always disconnect the power plug before cleaning a Sword sh shredder
• Repairs must be carried out by a specialist. There are no user-serviceable parts inside a Sword sh shredder
• Keep the waste bin emptied so that the shredder output is not impeded
• Sword sh shredders should only be used within the de ned capacity
• Keep all loose articles of clothing, ties, jewellery, long hair or other loose objects away from opening
• Keep children away from the machine. This shredder is not a toy
• Do not pass paper clips or soft plastics through the shredder
• Shredders should be oiled on a regular basis and before any period of intensive shredding
• Lubrication should always be done when the shredder is cold. Never add oil to a hot shredder
• Always use a recommended lubricant in an non-aerosol container
• Never use ammable or aerosol cleaners on or near any shredder
• To see our video “Lubricating your shredder” go to www.snopakebrands.com/sword sh or scan this QR code
ENGLISH