HyperSpeed A3 6-roller Laminator For Professional Use To download or view these instructions in other languages please scan the QR code or visit www.swordfishsupport.
Operating Instructions Introduction Thank you for purchasing this Swordfish HyperSpeed laminator. This is a very sophisticated, high precision machine, capable of delivering excellent results. In order to get the best use from it, and to avoid damage from misuse, please read these instructions carefully. Please note that this is a constant heat, variable speed machine. Maximum speed will be achieved when using 2 x 75 micron pouches. Thicker pouches will pass through the laminator more slowly.
Operating Instructions SPECIFICATIONS Suitability Small Office & Office What makes it special? Swordfish UK Product Code Swift warm-up, fast lamination 40243 Maximum Paper Size A3 Colour Black/Silver-Grey Feed Entry Width (mm) 320mm Maximum Pouch Thickness 2 x 250 [500] Microns Maximum Pouch Thickness Total (mm) 1.
Operating Instructions Safety Precautions Failure to comply with any of the following safety precations could result in serious injury, fire or electric shock. This equipment is not intended for use by children. It is not a toy. Unauthorised attempts at repair will invalidate the warranty. Do not allow water, or damp media, to enter the laminator. Do not cover the laminator, or place anything on it. Risk of fire! Disconnect after use or when cleaning the laminator.
Operating Instructions Getting Started 1 Unpack your package. Dispose of the packaging responsibly. 2 Installation of the output tray: • Insert the output tray into the slot at the back side of the laminator. Gently push the tray upward until it is locked. • To remove the output try, release the snap fit lock and push the tray downward. 3 Decide where to locate the laminator.
Operating Instructions Operation 1 Insert the electric plug into the power socket. CAUTION Do not leave the laminator unattended during lamination. 2 Turn on the laminator by pressing the Power On/Off button and the blue POWER light will glow. 3 The default setting is 2 x 80 micron for copy paper. Press the Pouch button to select the pouch thickness you are using and press the Paper Type Selection button to select the item you are going to laminate.
Operating Instructions Operation cont. 6 Insert the sealed end of the pouch straight into the laminator through the inlet. Once the pouch is engaged by the rollers, it will be fed into the laminator automatically. CAUTION • Always feed the pouch into the laminator in the middle of the inlet where the sensors are located. Feeding the pouch at the side of the inlet may lead to malfunction. • Do not laminate multiple pouches. Always laminate one pouch at a time.
Operating Instructions Operation cont. 7 The laminated item will be transported out of the laminator automatically. CAUTION • Do not try to pull the pouch out by force. This may result in creases or curves in the laminated item and may damage the laminator. • Remove the laminated item from the output tray. • The laminated item will be hot. Please handle with care. Cool it down on a flat surface. TIPS If the correct settings are not chosen, the following lamination results may appear.
Operating Instructions Anti-Jam Function • The laminator is equipped with a jam detection device. If there is a jam, the laminator will reverse itself automatically to eject the jammed pouch. The laminator will shut down by itself when the jammed pouch is removed. • If the lamination pouch is jammed / misaligned before the jam detection device is activated, press the Roller Reverse button manually and pull the jammed / misaligned pouch out of the laminator gently. Forceful pulling may damage the laminator.
Operating Instructions Essential Information cont. • Do not laminate an empty pouch. The pouch will jam and damage the laminator. • When laminating several documents consecutively, wait until the previous pouch has been removed from the laminator before inserting the new pouch. Otherwise it may jam and damage the laminator. • To prolong the lifetime of the machine, it is recommended that you switch off the machine for 30 minutes after 4 hours of operation.
Operating Instructions Troubleshooting The POWER light does not glow when the laminator is turned on. Please make sure the plug is properly plugged into the power socket. The pouch cannot be laminated. Please check the thickness of the lamination pouch. The total thickness cannot exceed 1.0mm. The pouch cannot be laminated thoroughly, white spots appear on the pouch. The speed of the laminator is too fast. Select a setting for thicker pouch or paper type. The pouch becomes creased and wavy.
Have you seen the rest of the Swordfish range? Pencil Sharpeners The Triple Pointi Paper Shredders VariPoint Paper Trimmers 800XC A3/A4 SuperSlim 1200XXCD A3 Ellipse-500 To find out more information on the full range of products, visit us at www.snopakebrands.com www.snopakebrands.
