SWX-910025 S35-3 Nitro Buggy Manual

BAG

101018

104010

108001

2503260 (#14 #15)

106016

108001

M3x12mm FH/ST HEX Screw

330781

116016

Ball Bearing 5x11x4mm

2503260 (#14 #15)

330215A

330661A

2503261

101018

SHIM 13x16x0.2mm

104010

M5x4mm Set Screw (Flat Bottom)

Pro Tip:

Before installing the M5x4 set screw (104010),

remember to clean the set screw and center driver joint (330661A) rst.

Then apply TLC on the set screw.

Note:

The aluminum front lower arm holder (330215A) can offer 0° or 1°

kick-up for your front lower suspension.

You may use the inserts 2503260-14 to get 0°

kick-up or 2503260-15 to get 1° for your front lower suspension.

2503260-14 Front Lower Aluminum Arm Holder Inserts (0 degree)

2503260-15 Front Lower Aluminum Arm Holder Inserts (1 degree)

Note:

101018SHIM 13x16x0.2mm

Please use 13x16x0.2mm shims to adjust the play between the crown gear and pinion gear.

Standard suggestion is 1pc shim on the diff crown gear side and 2pcs on the other side.