User's Manual

Note: This product don't have these functions. only have WiFi function
LED Status Indicator of The STACK Box
Depend on
internet
connection.
Usually ~ 8 mins
On On Off Blinking every
0.25 secs
Online Firmware
Update In Progress
<60 secsOn Blinking every
0.25 secs
Off Off WPS / Network
Reset In Progress
N/AOn Blinking every
0.25 secs
Blinking every
0.25 secs
Off Hotspot Mode
(Refer Step 2)
N/AOn Off Off Off Internet Not
Connected
N/AOn On Off Off Internet
Connected
N/AOn Blinking every
0.25 secs
Off Blinking every
0.25 secs
Failed to get
IP. Retrying...
<2 mins, then
followed by
normal Power
Up
Off On On On SD Card/USB
Storage (FAT
Formatted)
Firmware Update
In Progress
Power LED Internet LED Attention 1 LED Attention 2 LED State Max. Duration
Off Off Off Off Power Down N/A
On On On On Power Up <3 secs, then
wait maximum
4 mins before
start using the
box
To get the most functionality from your STACK Box, it is recommended to perform
an online update once the box is first connected to the Internet.
Online Firmware Update
SD Card / USB Storage Firmware Update
Download the latest STACK Box firmware from http://thexuan.com/recovery-image
to your SD Card or USB Storage (FAT Formatted) and follow the instructions on the
page to perform the firmware update.
Go to ‘Home’ and select your box
1
Under My Apps, click on ‘Setup’
2
Click on ‘Firmware Update’
3
Scroll to the bottom, and click on ‘I Agree To Update’
4
Page6Page5
USB2.0 Ports
Optocoupler/Opto-isolator
Connections
For a pinout diagram and detailed information about the Optocoupler/
Opto-isolator, Raspberry Pi-Bus, USB 3.3V Internal Bus and XBee Bus, please refer
to http://thexuan.com/bus_details.pdf
How to install internal technology-enabling modules
inside the STACK Box
USB 2.0 3.3V
Internal Bus
e.g. Z-Wave Stick
e.g. XBee Pro (ZigBee) module
e.g. EnOcean module
Raspberry Pi Bus
XBee Bus
Side Open
Make sure your mobile device is connected to the same network during the setup steps.
Internet is not mandatory for the day-to-day operation of the STACK Box. Without internet connectivity
a few features will be unavailable.
Once the STACK Box is successfully connected, you may be prompted to update the firmware.
NOTE
Setup through Ethernet
Designed by CLOUD MEDIA
in California and Malaysia.
Assembled in China.
Model : STACK Box
An Apps Driven IoT Hub (Gateway)
DC 5V RS-232
IN1+ IN1- IN2- OUT1-IN2+ OUT1+ OUT2-OUT2+
Reset
WPS
Open the Xuan App after connect to the Xuan Wi-Fi SSID.
Setup through Hot Spot
Xuan (85:77:E6)
82%11:28 AM
Wi-Fi
Wi-Fi
linksys&
CHOOSE A NETWORK...
Settings
airlink
Page4Page7