User manual

SY-KVM31036 11
Audio Selection
Audio Selection (Audio Auto-Switch Function)
Press [Scroll Lock] + [Scroll Lock] + [A], then the Audio-Switch function will be
disabled/enabled alternately. The Audio-Switch function is on by default.
Audio Selection (Hotkey Switch for Audio Selection)
You can use the following hotkeys to switch audio to the indicated port. There is
no indicator for the audio selection.
[Scroll Lock] + [Scroll Lock] + [Z]: Switch audio to port 1
[Scroll Lock] + [Scroll Lock] + [X]: Switch audio to port 2
[Scroll Lock] + [Scroll Lock] + [C]: Switch audio to port 3
[Scroll Lock] + [Scroll Lock] + [V]: Switch audio to port 4
Auto-Scan Function
Auto-Scan Function (Activate Auto-Scan)
Press [Scroll Lock] + [Scroll Lock] + [S], then the Auto-Scan function will activate
and, the KVM will switch the display through all the ports sequentially.
Auto-Scan Function (Auto-Scan Time Interval)
The default time interval of Auto-Scan is 5 seconds. You can press the numeric
key [1], [2], [3], and [4] to adjust the time interval during auto-scan. The mapping
table is:
N Scan Interval
[1] 5 sec
[2] 10 sec
[3] 15 sec
[4] 20 sec