User manual

SY-KVM31036 5
Hardware Installation
1. Connect USB keyboard/mouse to the console front ports of the KVM.
2. Connect all audio cables to each computer, KVM, speaker, and microphone is
necessary.
3. Connect any other USB device to the USB 3.0 Hub downstream ports if
necessary.
4. Connect the monitor HDMI cable to the monitor output port of the KVM.
5. Connect the DC 5V power adaptor to the KVM.
6. Connect the HDMI cable between the HDMI port on the computer display card
and the HDMI input port on the KVM.
7. Ensure all USB ports on your system are up-to-date with the latest drivers
available.
8. Connect the USB 3.0 cable Type-A end to the computer and the cable Typ-eB
end to the KVM switch.
9. Turn on the computers.
USB Enumeration
This KVM support USB plug & play. All components can be added and removed
at any time without the need to shutdown the unit. However, it will take serveral
seconds to enumerate USB devices. Time consumed depends on the number of
USB devices and the speed of the computer.