Installation Instructions

Safety and environmental instructions Page 10/57

Installation and starting instructions

Take care when choosing the location for installing the controller!

SYCLOPE COOLTouch

controller should not be installed in a hazardous environment and

should be protected against splashing with water or chemical products. It should be installed in

a dry, well-ventilated and isolated location.

Make sure that the chemical sensors used with this controller correspond well to the chemicals

used. Refer to the individual technical note of each sensor. Chemistry of water is very complex,

in case of doubt, contact immediately our engineering service or your approved installer/reseller.

Chemical sensors are sensitive elements using consumable parts. They must be supervised,

maintained and calibrated regularly using specific calibrator systems not-provided with this

equipment. In the event of defect, a surplus possible hazard of chemical injections can be noted.

In the doubt, a service contract must be taken near your reseller/installer or failing this near

our engineering services. Contact your approved installer/reseller or our business service for

more information.

4) Identification and location of nameplate

Manufacturer’s label Particular risk. Read the manual

Model of the product / Trade Mark Product which can be recycled

Reference of the product UKCA approved

Range of power supply CE approved

Values of maximum current Country of manufacture

Class of protection Manufacturer square code

Identification of the manufacturer FCC ID

Serial number

Nameplate