Installation Instructions

General use Page 32/57
Installation and starting instructions
V. General use
SYCLOPE COOLTOUCH
®
is intended for measurement, regulation and treatment of swimming pool
water. The installation of SYCLOPE COOLTOUCH
®
equipment is based on the principle of measurement
and regulation on the pool filter circuit.
The evaporated water from the cooling tower is supplemented by new water. A stand-alone level
switch keeps the water level constant. These operations increase the mineral salt content of the
circulating water. To reduce this content, the deconcentration valve must be opened at defined
intervals. This loss is compensated by the supply of new water.
To prevent corrosion and tartar formation in the cooling tower, an inhibitor and/or dispersant should be
added in proportion to the new water supply. To ensure that the cooling tower water does not become
infected with germs, it must be regularly added oxidizing or non-oxidizing biocides following a predefined
cycle.
Analyses
Electrovalve Water meter
New water supply
Heat exhanger
Deconcentration electrovalve
Sewer evacuation
Automatic
water level
Filter
Inductive conductivity
probe (option)
Flow rate
T°C
Bromine
probe
Conductivity
sensor
Volume count
External control
Biocide A Biocide B
Inhibitor
Dispersant
PC – RS485