Installation Instructions

Input mode Page 43/57
Installation and starting instructions
VIII. Input mode
The SYCLOPE COOLTOUCH
®
controller has a 5’’ touch screen. All orders are made by pressing
areas of the screen provided.
1) Setup or Settings code entry screen
This screen will appear if a Setup or Setting code is programmed.
For more security, numbers are displayed randomly each time this screen appears.
2) Numerical value entry screen
This screen will appear when entering a numeric value.
Depending on the values to be entered, some keys may be greyed out because they are not
used for the expected value.
The decimal symbol changes automatically according to the language.
If an incorrect or out-of-scale value is entered, the « Min : 0 – Max : 14.00 » is displayed in
red when you press « Enter »
Validate
button
Cancel
button
Numeric keypad
Enter the “Setup”
password
Conductivity
Delete
button
« Min. » and « Max. »
value possible
Deactivate a function
button
Cancel
button
Validate
button
Decimals value
button
Numerical keypad
Negative value
button
Display of the
entered value
Type of entry expected
0 mS/cm
Min : 0 –
Max :