Programming Instructions

SYCLOPE COOLTOUCH setting Page 22/40
Communication programming instructions
 Customize NTP server #1
- Your regulator already has an SNTP server address. You can however customize the servers used for the
setting and enter the first address here.
 Customize NTP server #2
- When setting if server #1 cannot be reached, your regulator will make an attempt to this second server if
the box is checked and the address is entered.
ii. Web page
Enter, in the search bar of your browser, the IP address of your regulator, which you will find in the communication
information, followed by the port number you entered above (ex: 10.10.1.2:8080) to display the web page below.
The web page above will include the main information of your regulator (Date, time, operating status,
windows of the different parameters filled in, etc.)
Active locking no changes possible.
Inactive locking change possible.
E01 : Water Volume E02 : Conductivity E03 : Temperature
50
1905
21.10
l
µs/cm
°C
Bleed
Biocide A
Measure
Inhibitor