Programming Instructions

Programming screen « Setup menu » Page 22/78
General programming instructions
« Customer » view
 Sensor – Scale – Temporization – Delete & Save
- See previous section.
 Unit mg/l
- Select the unit of measurement of the sensor, on this selection button we find the information of the
currently selected unit (mg/l).
Press to change it.
 Value min. 0 mg/l
- Low sensor value input. Here the current value is (0).
Press to open the numeric keyboard and enter the desired value.
 Value max. 1 mg/l
- High sensor value input. Here the current value is (1).
Press to open the numeric keyboard and enter the desired value.
 Slope 16 mA/mg/l
- Sensor slope value information based on min & max values entered.
This part is greyed out (not accessible), it is calculated automatically. In our case the calculated value is
(16)
Analog input setting
AI1 – Sensor Free chlorine
Scale Customer
Starting delay time
minute(s)
Unit mg/l
Value min. 0
mg/l
Value
max. 1
mg/l
Slope 16
mA/mg/l
2