Programming Instructions

Programming screen « Setup menu » Page 52/78
General programming instructions
 Hysteresis 0.50 mg/l
- Enter the hysteresis value of the alarm threshold. Here the current value is (0.50).
Press to open the numeric keyboard and enter the desired value.
This setting is only available if the unlock option is enabled in the setting options.
This value sets a value delta in which the alarm remains active. This allow for stable alarms when the
measurement value oscillates around the value of an alarm threshold.
 Time limit OFF
- Enter the value of the time limit to take into account an alarm. Here the time limit is disabled, current
value is (OFF).
Press to open the numeric keyboard and enter the desired value.
 Stop dosing on alarm
- Selection of alarm(s) to be taken into account, for stopping the dosage. Multiple selection type, press
the alarms you want to associate.
This setting is only available if the unlock option is enabled in the setting options.
Save:
When a change is made, the “SAVE” button appears (floppy icon), you must save your configuration by
pressing it.